Digital Fine Dust "Sniffer" +++ 13D Display Series From EDT - Part 1 +++ Design-In Award for GLYN-SUPPORT
Reliably Detects Fine Dust:
Digital "Sniffer Nose" with SENSIRION Sensor
Good cooperation can inspire innovation.
This fine dust detector is a very successful project between manufacturer, distributor and customer.
The Dustlight mobile fine dust measuring device from Latai has been specially developed for trade, industry and workplaces with high levels of dust. It protects employees from the dangers of fine dust and reduces health risks due to dust exposure.
Intuitive to operate and read
Dustlight is easy to operate at the touch of a button and has an intuitive display that shows the fine dust concentration in a language-neutral and easy-to-understand way.
Green means that the air quality is OK, yellow indicates that caution is required and red warns of dangerously high concentrations of particulate matter above the limit value.
This makes it clear when suitable protective measures such as wearing a mask or activating an extraction system are required.
The Sensor to Go with it:
SENSIRION Fine Dust Sensor SEN50
As Dustlight is used in areas with very high dust concentrations, the internal protection mechanisms of the SEN5x are particularly important for Latai.
The veil airflow, which protects the optical elements with a filtered layer of air, and the self-cleaning function of the sensor series optimally complement the pre-filter systems developed and patented by Latai itself.
Test and evaluation phase
During the test phase, the durability and service life of sensors from various manufacturers were tested. The SENSIRION SEN50 delivered the most convincing and stable measured values.
Benjamin Steidl from Latai: "The consistency of the individual sensors with each other was a particularly important factor for us. The helpful SUPPORT from the GLYN specialists helped us a lot with the development and procurement".
The Sensor Platform
The SEN50 is a derivative of the SEN5x sensor platform.
This series is an "all-in-one" sensor solution for the accurate measurement of relevant environmental factors. These include particulate matter, volatile organic compounds (VOCs), nitrogen oxides (NOx), relative humidity and temperature.
All modules have internal measured value processing and compensation in common. This allows developers to concentrate on their core competence and develop user-friendly applications. This saves time-consuming optimizations and shortens the time-to-market.
The Update to the Sensor Platform will be Available in Q4/2024
From around Q4 2024, a new SEN6x sensor platform will supplement the existing modules.
Additional measured variables such as CO2 or formaldehyde will be available in a new, even smaller form factor.
Initial information on the SEN6x sensor platform can be found here: Link
Are you interested in the innovative Dustlight?
Click here to go directly to the manufacturer's website: https://www.dustlight.de/
Further information and answers about the SEN5x or SEN6x can be found here: