i.MX93 Starter Kit from Ka-Ro: 2 x Ethernet + LVDS for connecting larger displays
One of the first starter kits with the powerful i.MX93 on-board is the QS93-SV01 module from Ka-Ro.
A DF13 connector is available on the starter kit for connecting a display.
GLYN offers matching cables for this connector so that you can operate the displays from the extensive TFT family concept directly with the kit.
The starter kit has two Ethernet interfaces as well as a Rasberry-PI compatible "Expansion Header". A very large number of other peripheral interfaces are available via the module, such as UART, I2C, SPI, two CAN FD interfaces and 2 x USB 2.0. Linux is already pre-installed.
For debugging an additional USB port (USB to UART Bridge) is available.
- QS module QS93-5210 on board
- Dual Ethernet
- DF13 LVDS Display Connector
- MIPI CSI Camera Connector
- 4-layer PCB
About the used soldering module QS93-5210:
The module installed on the starter kit is equipped with NXP™s i.MX9352.
The processor features two 1.5 GHz ARM ® Cortex® A55 cores and a real-time Cortex-M33 microcontroller subsystem with full peripheral access.
Machine Learning is also supported by the ARM Ethos-U65 microNPU (Neural Processing Unit) with 256 MACs/cycle. In addition, 1 GByte LPDDR4, as well as 4 GByte eMMC are available on the module.
Further information is available on request.