LTE-M / NB-IoT modem for easy integration of your Bluetooth 5 components into the IoT
Bluetooth 5 sensors and other components easily connected to a cloud? The compact, fully integrated LTE-M / NB-IoT modem Pinnacle™ 100 from LAIRD CONNECTIVITY brings everything you need for this.
For newcomers to the IoT world, wireless design is made much easier with radio certifications and carrier approvals.
On a small module, the Pinnacle™ 100 combines LTE CAT M1 and NB-IoT radio standards with Bluetooth 5 and a pre-integrated antenna or three U.FL connectors for full flexibility in antenna selection. Worldwide radio certifications and LTE carrier approvals are already included.
Unique: Always up-to-date software thanks to firmware and OTA updates
Thanks to secure, pre-programmed firmware updates via a UART or JTAG connection, your software will always be up to date wherever you are. For modules that are only connected wirelessly, the PinnacleTM 100 also offers an OTA (Over-The-Air) update via LTE or Bluetooth.
The PinnacleTM 100 is composed of two units:
The Sierra Wireless HL7800 provides global connectivity to the LTE world with bands 1, 2, 3, 4, 5, 8, 12, 13, 20 and 28.
In addition to Bluetooth 5, the Nordic nRF52840 supports LE Coded for long range connectivity and 2M PHY for higher data throughput. Moreover, you can build BLE mesh networks and extend them with customized "custom services".
The powerful Cortex-M4F with 64 MHz also meets your higher demands. The Zephyr™ Real-Time Operating System (RTOS) enables rapid application design and reduces bill of materials (BOM).
For maximum flexibility in connecting to your application, the M.2 form factor connector features UART, SPI, QSP, I2C, and a JTAG interface, among others.
The technical data at a glance:
- Cellular: LTE-M / NB-IoT
- Bluetooth 5, BLE5, LE Coded, 2M PHY, BLE Mesh
- Pre-integrated antenna, 3 U.FL connectors for LTE, GPS, Bluetooth
- 4FF Nano SIM card slot
- Cortex-M4F microcontroller with 1 MB Flash and 256 KB RAM
- Hostless operation with Zephyr RTOS
- AT command controllable
- Industrial temperature range from -40 to 85 °C
- Secure firmware upgrade, pre-programmed with LAIRD CONNECTIVITY's Secure Bootloader
- Worldwide radio certifications and approvals for FCC, IC CE, BT SIG, PTCRB, GCF, AT&T, Verizon
|453-00010||Pinnacle 100 modem with integrated antenna|
|453-00010-K1||Development kit Pinnacle 100 with integrated antenna|
|453-00011||Pinnacle 100 modem with U.FL antenna connector|
|453-00011-K1||Development kit Pinnacle 100 with U.FL antenna connector|
Start your IoT application right away.
We are at your service with first-class premium SUPPORT and best-in-class support directly from LAIRD CONNECTIVITY.