Delivers precise measurement results:
First fine dust sensor with MCERTS certification

07_SPS30_720px

The SPS30 from SENSIRION is the first fine dust sensor for the mass market with MCRTS certification for its performance.

The certification further attests that the SPS30 can be easily integrated into applications that must comply with the European air quality standard DIN EN 15267.

The MCERTS certification programme was created by the UK Environment Agency and is based on international and European standards. This programme ensures high quality monitoring of environmental data.

Meets the stringent DIN EN 15267 standard
The SPS30 has been proven in laboratory and field tests to meet the latest MCERTS and associated European air quality standards according to DIN EN 15267.
Compliance with the above standards requires low variability within the model (≤ 5 µg/m3). This makes the SPS30 the first choice for integration in applications that require high precision.
Certification is carried out by "Sira Certification Service", one of the leading notified bodies in Europe, accredited to ISO/IEC 17065 UKAS and a member of the Canadian Standards Association (CSA Group).

Patented pollution resistance technology
The performance of the SPS30 fine dust sensor is based on the measuring principle of precise detection of scattered laser light. The patented contamination resistance technology in combination with high-quality and durable components enables accurate measurements right from the first start-up. And this over a long service life of more than eight years.

Besides CO2, fine dust is an important indicator of air hygiene.

What fine dust particles do to the human body
Fine dust is differentiated according to its size and divided into so-called size fractions:

  • PM10: particles with a maximum diameter of 10 µm
  • PM2.5: Particles with a maximum diameter of 2.5 µm
  • Ultrafine particles with a diameter of less than 0.1 µm

PM10 particles can reach our nasal cavity, PM2.5 can reach the bronchial tubes and ultrafine particles can even reach the lung tissue and the bloodstream. The effects of fine particles on health vary depending on how large they are and how deeply they penetrate the body. Over time, they cause lung diseases such as bronchitis or asthma and contribute to cardiovascular disease.

Strict particulate matter limits must be observed
Limit values for the fine dust fraction PM10 have been in force in the EU since 2005. The daily limit is 50 µg/m3. This may not be exceeded more than 35 times a year. The permissible annual mean value is 40 µg/m3.
For the even smaller particles PM2.5, the limit value is 25 µg/m3 as an annual average.
Since 1 January 2015, this limit must be complied with.
Since 1 January 2020, the annual mean values for PM2.5 particulate matter may no longer exceed 20 µg/m3.

The "subtle" difference between laser and LED technology
In optical fine dust sensors, the light scattering of the particles to be measured is detected. The basic structure consists of a light source and a detector for the scattered light.

This is why the fine dust sensor works so precisely:
The SPS30 uses a laser light source and the latest algorithms to measure the mass concentration (µg/m³) and the quantity concentration (particle number/cm³) of the following particles.

Mass concentration: PM1.0, PM2.5, PM4 and PM10
Mass concentration: PM0.5, PM1.0, PM2.5, PM4, PM10

The measurement with a sharply focused laser offers considerable advantages compared to similar products that only use an LED as a light source.

The size and number of individual particles can be detected accurately. This makes it possible to distinguish between size fractions.

07_01_LaserBeam_720px

07_02_LaserBeam_720px

Similar products use an LED as a light source. However, the light beam of LEDs far exceeds the particle size.

As a result, the signals of the individual particles add up and the particle size cannot be distinguished.

07_01_LEDBeam_720px

07_02_LEDBeam_720px

Maintenance-free long-term precision
Natural deposition of fine dust in conventional fine dust sensors leads to a steady deterioration of the signal quality.
Particularly critical are the deposits on all optical components such as the light source (laser or LED) and the photodetector.
As a result, equipment integrating these PM sensors will not function properly after some time, leading to malfunctions, user complaints, maintenance, service and/or replacement parts.

SENSIRION's unique and patented contamination resistance technology and durable components give the SPS30 unsurpassed robustness, long-term stability and high accuracy with a lifetime of more than eight years of continuous operation with 24 hours/day use.

07_CleanPhotodiodeAfterStressTest_720px

The picture shows an opened SPS30 fine dust sensor after a stress test.
You can clearly see that the flow path of the air is designed in such a way that the optical elements such as the laser diode and photodiode are protected from dust.

Ideal areas of application for the SPS30 fine dust sensor are:

  • Air measuring stations
  • Air purifiers
  • Air conditioning systems
  • Demand-controlled ventilation systems
  • Air quality and environmental monitoring
  • IoT and smart home devices

The SPS30 has a digital I²C and UART output and is fully calibrated.
It is available immediately from stock GLYN.

You can find more information here:

Type SPS30
Particle detection size range Mass concentration: PM1.0, PM2.5, PM4, PM10
Number Concentration: PM0.5, PM1.0, PM2.5, PM10
Mass concentration range 1…1000 µg/m³
Operation temperature range -10...+60
Interface UART, I²C
Supply Voltage 4.5…5.5 V
Avarage supply current <60 mA
Dimensions 40,6 x 40,6 x 12,2 mm³
Datasheet SPS30

12_Kit_720x480px

Quick start with evaluation kit

To get to know the possibilities of the SPS30, the evaluation kit SEK-SPS30 is also available immediately from the GLYN warehouse.
It consists of the SPS30 fine dust sensor and the matching USB sensor cable for direct connection to the PC.
With the SENSIRION ControlCenter, which you can always download free of charge from the SENSIRION website, you can quickly get an overview of the fine dust pollution in your environment.

Stay Tuned - Environmental Sensor Node SEN5x

07_SEN55_720px

Planned for the 4th quarter of 2021, the SENSIRION sensor family will be joined by an all-in-one sensor solution for the accurate measurement of:

  • Fine dust
  • volatile organic compounds (VOCs)
  • Oxidising gases (NOx and O3)
  • humidity and temperature

The measured values are provided digitally via only one interface.

We will be happy to notify you when the product is available.

We will be happy to provide you with further information, a quotation or answers to your questions personally - just give us a call or send us an email!

Sensors

Tel.
+49 6126 590-388
Fax
+49 6126 590-188
sensors@glyn.de

Share this article