SILICON LABS Thunderboard Sense 2 - Test seven sensors in one go…


The board with plenty of sensor power for easy evaluation of sensors.

With the Thunderboard Sense 2, SILICON LABS offers a multi-sensor starter kit with BLE and Cloud connection.

Now you can easily test 7 sensors at once on a board just 30 x 45 mm in size:


Now available as a module - Enabling you to measure humidity and temperature away from the mainboard


Environmental sensors

There are applications where humidity and temperature sensors must be placed at a very specific position in the device. And this is often not in the direct proximity of the mainboard.

With the SCC30-DB module from SENSIRION, you can now install a humidity and temperature sensor anywhere in the device. This can be conveniently connected to the mainboard via a cable. This saves you having to spend time developing your own sensor module.


Now available, only from GLYN - The sensor sample box for the new Hall switch family HAL15xy


Red SUPPORT for Hall sensors.

Together with the manufacturer TDK-MICRONAS, we are offering a sample box with a selection of brand new Hall switch sensors from the HAL15xy family.

CD-ROM with overviews and detailed data sheets is included in the sample box.
The following Hall switch sensor ICs with different sensitivities and functionalities are included
in the box


Reliable measurements of CO2 in air


Carbon dioxide, also known as CO2, is a colourless, odourless and non-flammable gas that is one of the natural components of our atmosphere. It is practically imperceptible to the human senses.
CO2 is heavier than air.

CO2 is not toxic to humans in low concentrations, but it does impede oxygen intake. A high concentration of CO2 in the air can cause headaches and eventually lead to loss of consciousness.


Security and reliability in embedded automotive systems The CYPRESS Semper NOR flash is ISO 26262-compliant


25 years of data retention, thanks to EnduraFlex™ architecture.

The Semper NOR flash family from CYPRESS is ASIL-B-compliant to fulfil safety requirements in embedded automotive systems. The devices support operating voltages of 1.8 and 3.0 V in the automotive temperature range from -40 to +125 °C.

EnduraFlex™ architecture ensures secure retention of data:
One device can be divided into several partitions.
These partitions can be individually optimised for high rewritability or long-term data retention. 
For example, for frequent data writes, a partition can be configured to deliver up to 1.28 million program-erase cycles for 512 MBit density parts or 2.56 million for 1 GBit parts. 
For the storage of program codes and configuration data, a partition can be configured to safely retain data for more than 25 years.



Displays for exacting requirements in the fields of agriculture and construction The Toughness series by MITSUBISHI


The search for suitable displays for sectors like agriculture and construction can be challenging.

These sectors require extremely robust specifications, such as:

  • vibration tolerance up to 6.8 G
  • operating temperature from -40 to 85 °C
  • brightness of up to 1,500 cd/m²
  • LED lifespan of up to 100,000 hours 


Everything you need Modern 7” display with PCAP, IPS and RGB interface


A large number of different customer preferences are now available in one display.

Many customers would like a display which offers an RGB (TTL) interface, while retaining the advantages of modern technologies like IPS and PCAP.

Precisely for these customers, distributor GLYN and manufacturer TIANMA have developed the 7” display TM070RVHG12.

Thanks to the RGB (TTL) interface and resolution of 800 x 480 pixels (WVGA), not many changes are needed to your control system to enable you to use this display.